CinemaGear.com

Motion Picture Equipment        buy, sell, trade

Accessories

Specialty

Gear &

Widgets

Zoom Lenses

Lenses

Item # 10110W

Saf-Rail is a must have household safety item.  Designed to give you a comfortable secure place to hold on, even when your on the top step of your ladder.  Nationally advertised at $39.95  we have a limited quantity available at only $19.95.

The perfect tool for the Grip, the Gaffer, anyone on your set,  the handyman or handywoman around the house or on the job.

<Rear Screen Process Projector Head.  For stop motion animation background projection.  Not completed, with bell & Howell 35mm movement, and cam  $900.   Item # 10084W

Mitchell GC or Standard adjustable Nikon lens board.  $750.          Item # 10086W . . . . . . .  >

<Motion Controlled 5 K Dimmer.  Stepper motor, MS connector, 5 K power stat and 50’ power cord.   $1,000.       Item # 10087W

          Eymo Spider Turret. 2 available  $195. . .>

                          Item # 10090WA & 10090WB

<Magazine take-up assembly for Acme or Oxbery camera, works with 1000’ or 400’ magazines. $350.    Item # 10093W

< Follow Focus Bracket for Mitchell Iris Rods, works with GC or Standard $195. Item # 10095W

<Matte Box Bracket for Mitchell GC, Standard or NC cameras $195.  Item # 10097W

 

Stepper Motor mounting bracket 5”Lx 3 ⅜”w x ¼” thick. 2 ⅞” pilot, 1 ¾” through hole, 4 ea. 8-32 screws 2 ea. ¼” slots. $45. ..… Item # 10102W >

<Bi-pack Torque Motor Take-up Plate.  For 400’

Mitchell bi-pack Magazines  ……… $250.

                              Item # 10083W

 

Technicolor optical printer head with 35mm…..>

movement and take-ups.  $900.                      

                         Item # 10085W

<Continuous Roll paper background or titling fixture.  Stepper motor drive, MS connector. $125.                       Item #10099W

 

Stepper motor mounting plate with plug hole. 3½” L x  1½” h ⅛” ……….  $25.  Item # 10104W >        

<Mini Motion Control Ram.  Lead screw and stepper motor drive, extends 3”, MS connector.

$350.                       Item # 10118W

 

MS connecter mounting plate , 2” tall x 2½” wide at base. ……………….. $ 25.  Item # 10105W>

<35mm Film pin block and clip cutter. Cut film frames so they fit in a Mitchell GC, Standard or NC cameras viewfinder $125.  Item # 10119W

Camera right angle mounting plate.  ½”   aluminum plate 3 ea. ⅜”-16 tie down points 12”t x 8.¼” w x 7.¼”d.   $125. ……… Item # 10120W >

<Control Panel machined from solid aluminum 4.¼”x l x  2½”x 1½”h  3⅛” x 2 ¼” x 1 ⅛” deep opening, 8ea. ¼” holes 1ea. 3/8” hole  $ 25.  Item # 10098W

< Stepper motor mounting bracket 3” tall x 

2 1/4” w x 3.1/4” L at base. 4 ea. 10-32 tapped  holes 1 ea. 1/4’ through hole. $25. Item # 10106W

 

Stepper Motor mounting plate 4”tall x  5 ¼” at >

base. 4 ea. 10-32 $45.  Item # 10109W

< Stepper Motor flange 2.⅜ Sq. x ¼”, 4ea.

10-32 tapped holes ¼” through hole.  $20.

                                  Item # 10107W

Stepper Motor mounting plate. 6”L x 2 ¾” h x ¼”. 1.½” pilot 3/8 through, 4 ea. 8-32, 2 ea. ¼” slots x 2”.  $35.     Item # 10108W >

< Stepper Motor mounting bracket 5”Lx 3 ⅜w x ¼”thick. 2 ⅞” pilot, 1 ¾” through hole, 4 ea. 8-32 screws 2 ea. ¼” slots. $45. Item # 10111W

 

MS connector mounting bracket. 4” x 1.5” x .125”> 1” body wholes 6-32 screws. $75.  Item # 10112W

<Clamp on Pipe clevis joints for 1 ¼” round pipe.  4” tall x 2” sq, ½” clevis tail.  $40. each

                                     Item # 10100W

 

Belt & Pulley cover for 1” to ½” pulley and ……. > belt drive. 7 ¾” L, 1 ⅝” W, 1” inside. $25.

                                  Item # 10101W

<Model mounting rigging.  1” sq tube welded $35.                    Item # 10115W

 

 

Model mounting rigging.  1” sq tube welded >

$35.                         Item # 10116W

< Iris Rod Bracket for ⅝” Mitchell Rods.  5” x 2” x 1”  $95.   

                            Item # 10113W

 

Control panel Face Plate. 5” x 2  ¼” x  ⅛”. $10.>

                                Item # 10114W

< Model mounting rigging.  1 ½” sq tube welded $35.

                                  Item # 10117W

<Bore Scope roto adaptor for Bell & Howell 2709 camera           Item # 10094A                        $150.

Bore Scope adaptor for Acme model 6 camera >

Item # 10095A                                                            $150.

Magazine lids for Bell & Howell 400’16mm ….> filmo Magazines   $25. each       Item # 10094W

Roto Scope lamp, prism and controller for Bell & Howell 2709 camera.    Item # 10121A         $450. >

Stepper Motor mounting plate. 6”L x 2 ¾” h x ¼”. 1.½” pilot 3/8 through, 4 ea. 8-32, 2 ea. ¼” slots x 2”.  $35.          Item # 10096W >

Stepper motor mounting plate for Acme or Bell & Howell. 5.¼” x 3.⅜”x 1.¾” 3” pilot, 1” through hole        $ 95.                   Item # 10103W      >

only

As seen on TV,

in The Family Handyman, Sporty’s Tools and the Sportsmans Market magazines, etc.