Mitchell Motion Control Straight Head.  Mitchell Straight Head setup with stepper motors, MS connectors, 4 digit revolution counters, degree of rotation indicator wheels, inching knobs, Mitchell base, lock down plate and nut, one crank and case.  For animation or any computer controlled application. ... $2,800.

                                              Item # 10071A

Worrall Geared Head, handles, crown nut and case. …. $2,400.

                                        Item # 10072A

Ferra Mount Arri II C highhat features sliding dovetail balance adjuster, Angeniux zoom lens support, J4 zoom motor bracket, 2 stage matte box, 2 trays, eyebrow with siders, rods and case. … … … … … … … … … … … …. $550.

 

                                             Item # C0 0117A

Spider High Hat, with Mitchell base, 4 sets of legs, levelers, and fitted case.  Cast aluminum construction.

                                                  $1,500.           

                                                        Item # 10076A

45° Camera Dolly Adapter.  Lets you get that extra bit of tilt in those tight areas.  Made to mount on and accept a standard Mitchell base.  Comes complete with a crown nut.

                                                      $395.

                                                Item # 10078A

11” Dolly Riser Plate with Mitchell top & Bottom.  Extra tall riser made to fit any dolly with standard Mitchell type top plate.  Heavy duty all aluminum construction complete with crown tie down nut.

                                                      $295.

                                                          Item # 10081A

Nodal point adjustable riser plate.  Two captured T nuts are mounted on the bottom plate.  These T nuts slide the length of the lower plate to help find camera and lens nodal point.  One T nut slides on camera aperture center and one slides on riser plate center. The 3/8-16 tie down screw on the top plate also adjusts the full length of the top plate for nodal point alignment.  All aluminum construction.

  $490.                                      Item # 10082A

Pearson Fluid Head Arri 2C camera adapter.  Excellent condition, dove tail and adjuster slot are clean and work smoothly, Tie down knob and Arri 2C key are clean and in good condition.

 

                                                  $ 200.

                                               Item # 10080A

Camera right angle mounting plate.  Mount your camera pointing straight down for animation or any downward view.  Made form ½” aluminum plate, 3 ea. ⅜”-16 tie down points 12”t x 8.¼” w x 7.¼”d.

                                                 $125.

                                            Item # 10120W

Clamp on Pipe clevis joints for 1 ¼” round pipe.  4” tall x 2” sq, ½” clevis tail for pipe.  Terrific for rigging that needs to flex for hinge.  

                                                    $80.

                                                        Item # 10100W

F & B Ceco Pro Junior Baby Sticks.  Very clean wooden legs are free of cracks or splits all tie down knobs work smoothly and all metal parts are in very good used condition, includes points (not shown).

 

                                                     $200.

                                                         Item # 10083A

CinemaGear.com

Motion Picture Equipment        buy, sell, trade

Accessories

Support

Specialty

Gear &

Widgets

Zoom Lenses

Lenses